Latest News

May 31, 2013

RB26DETT Timing Belt Alignment and Tension Adjustment

RB26DETT Timing Belt Alignment and Tension Adjustment

The RB26 is a timing belt engine. Like any engine, you want to make sure you get all the pulleys lined up correctly for the engine to run right. If you don't get everything lined up, you can end up chasing  issues, that turn out to be an actual mechanical problem. It is a little difficult to get all the dots and marks lined up because most of the time you don't have a straight view. Since your view is a little off, it helps to use a straight edge to double check all the timing marks.

Parts for RB26 Timing Belt Change

Timing belt -13028-20P25
Tensioner- 13070-42L00
Idler- 13074-58S00
Tensioner Spring- 13072-58S10

Water Pump - 21010-21U26
N1 Water Pump - 21010-24U27

My personal experience is that every time you have to go into the front of the RB26 engine, you want to replace the water pump, you want to replace the idler and tensioner pulleys, and the belt. You don't have to, some people get away with it, but for me, about every time I haven't replaced one of the big pulleys (bearings) they make noise. Kind of a "woooo,woooo,woooo" noise. Then the water pump I didn't replace, starts leaking out of the weep hole.  Eric over at EPP stocks a ton of RB26 parts, and I just picked up what I need to do the front of the RB on NISMO #500.

RB26DETT Cam Timing Adjustment
RB26DETT Ignition Timing Adjustment

Buy JDM Cars in the US from TopRank

1 comment:

pixgermany said...

Do not wait for your toothed belt to completely wear out or even break. As soon as you suspect any toothed belt faults, visit a reputable website like ours for toothed belt replacement. We make the supreme quality toothed belt by making use of a flexible polymer.